IBM 8651RM0 Hardware Maintenance Manual - Page 73
SCSI port B
![]() |
UPC - 087944340508
View all IBM 8651RM0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
1 Channel 2 2 Channel 1 3 Air baffle 4 Shuttle-support rails 5 SCSI port A 6 SCSI port B 7 Captive screws 7. If you have already installed the ServeRAID adapter, connect the cable to Channel 2 1 on the ServeRAID adapter. If you have not yet installed the ServeRAID adapter, connect the cable after you install the adapter. 8. Repeat this procedure to disconnect the SCSI cable from SCSI port A 5 on the system board and connect it to Channel 1 2 on the ServeRAID adapter. Attention If the air baffle is not installed correctly, the server will overheat. 9. Install the air baffle 3 . Make certain that the edges of the air baffle fit inside the shuttle support rails 4 . 10. Push the shuttle toward the front of the server and tighten the four screws 7 at the back of the shuttle. IBM Netfinity 7000 - Type 8651 65
![](/manual_guide/products/ibm-8651rm0-hardware-maintenance-manual-d671fe8/73.png)