IBM 8681 Hardware Maintenance Manual - Page 108
on the rear mounting rail and over the cage nuts, or clip nuts for the bracket.
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
The latch bracket for the left slide-rail assembly is labeled L. The latch bracket for the right slide-rail assembly is labeled R. f. Install two screws through the latch bracket and the slide-rail assembly and into the cage nuts or clip nuts. Do not tighten the screws. g. Attach the other slide-rail assembly to the rack as described in steps 3a through 3f. h. Press the slide-rail assemblies toward the mounting rails and tighten all screws. 4. Attach the cable-management arms (upper and lower): a. Position the cable-management arm bracket 1 on the rear mounting rail and over the cage nuts or clip nuts for the bracket. b. Install two screws through the cable-management-arm bracket and into the cage nuts or clip nuts. Tighten the screws. c. Attach the lower rigid cable-management arm to the bracket using one of the hinge pins 2 . 100 Netfinity Server HMM