IBM 8681 Hardware Maintenance Manual - Page 81

the parallel-port assignment by using the Configuration/Setup utility program. Video port: The I/O function card in the server has one SVGA video port. This port is used to attach a video monitor. The video port has a 15-pin analog connector on the back of the server. (Refer to "Input/output connectors and expansion slots" on page 122 for the location of the connector.) 5 1 10 6 15 11 The following table shows the pin-number assignments for the video connector. Table 6. Video port pin-number assignments Pin Signal 1 Red 2 Green or monochrome 3 Blue 4 Not connected 5 Ground 6 Ground 7 Ground 8 Ground 9 Not connected 10 Ground 11 Not connected 12 Not connected 13 Horizontal synchronization (Hsync) 14 Vertical synchronization (Vsync) 15 Not connected The integrated video controller has 4 MB of video memory. The integrated video controller supports the following screen resolutions: 640 × 480 pels with up to 16,000,000 colors 800 × 600 pels with up to 16,000,000 colors 1024 × 768 pels with up to 16,000,000 colors 1152 × 864 pels with up to 16,000,000 colors 1280 × 1024 pels with up to 64,000 colors 1600 × 1200 pels with up to 64,000 colors Keyboard and auxiliary-device ports: The I/O function card has one keyboard port and one auxiliary-device port that supports a mouse or other pointing device. (Refer to "Input/output connectors and expansion slots" on page 122 for the locations of the connectors.) Netfinity 8500R - Type 8681 73