IBM 8681 Hardware Maintenance Manual - Page 165
as far as they will go, until they reach the, unlocked position; then, release.
![]() |
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Refer to the illustration that immediately precedes "Installing an optional processor daughterboard and cache coherency filter cards" on page 155 while you perform the steps in this section. Attention: Do not lift the processor housing assembly by the latches. 1. If you have not already removed the processor housing assembly, do so now. Perform step 1 on page 149 through step 7 on page 150 and steps 1 and 2 on page 151; then, return here. 2. If you have not already removed the processor-cage cover 1 , do so now. Rotate the four fasteners 2 to the unlocked position; then, lift the cover and set it aside. 3. Open the latches at the top of the processor in connector A1, and remove the processor. Place it on a flat, static-protective surface. Repeat these actions for the remaining processors and terminator cards in the processor cage. 4. Remove the processor cage: a. Squeeze and slide out the release latches 1 as far as they will go, until they reach the unlocked position; then, release. as they will go, until they reach the unlocked position. b. Lift the processor cage out of the processor housing assembly, and place it on a flat, static-protective surface. 5. If necessary, remove the processor-daughterboard extraction tool from processor cage A (behind processor A4); then, place the processor-daughterboard extraction tool under and against the processor daughterboard, as shown, in the area marked Use extraction tool here. 6. Press the processor-daughterboard extraction tool downward to pivot and lift the processor Netfinity 8500R - Type 8681 157
![](/manual_guide/products/ibm-8500r-hardware-maintenance-manual-603c304/165.png)