IBM 8681 Hardware Maintenance Manual - Page 221
Use jumper J11 on the I/O, DIMM Minimum requirement = 1 DIMM
![]() |
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
adapters installed). If a PCI adapter is present and its attention light is flashing, suspect the following FRUs in this order: 1) PCI adapter 2) I/O board 3) I/O function card d. If no PCI adapters are installed and one or more PCI attention lights flashing, suspect FRUs in this order: 1) I/O board 2) I/O function card e. Power-off the computer, wait 30 seconds and then power-on the computer. f. If the system boots at least as far as the IBM logo screen, go to 16 on page 216. If the system will not boot to the IBM logo screen, consider the following note and continue with 8g. Note Minimum partial-boot requirements are: I/O Board I/O Function Card Midplane Power Control Card Power Supply (1) LED card Processor Daughter Board (1) Processor Controller Board Processor (1) Memory Card (1) DIMM (Minimum requirement = 1 DIMM of 128 MB or larger) Video Monitor (Display) g. Reduce the server to the minimum partial-boot configuration (see note). h. Retest the system. Use jumper J11 on the I/O board to force power on since the front panel is disconnected. i. If the system does not boot as far as the IBM logo screen, go to 10 on page 215. j. If the system boots to the IBM logo screen, power-off the system, remove jumper J11 on the I/O board, and add components back into the system one at a time and reboot the system until the system fails to boot as far as the IBM logo screen. This narrows the possibilities of the failing FRU to the last FRU added, or the board it plugs into. Netfinity 8500R - Type 8681 213
![](/manual_guide/products/ibm-8500r-hardware-maintenance-manual-603c304/221.png)