IBM 8681 Hardware Maintenance Manual - Page 140
Midplane removal
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Midplane removal Note Before beginning, see "Safety information" on page 240. 1. See "Removing the top cover" on page 136. 2. Remove all three power supplies. See "Hot-swap power supply installation/removal" on page 92 for instructions. 3. Remove the two screws 1 at the top of the midplane tray 2 which hold the midplane to the server chassis. 4. Lift the midplane up out of the chassis. 5. Remove the eight screws 6 that hold the midplane card 7 to the midplane tray. The power control card 5 will still be attached to the midplane by the bracket 4 and 3 (orange pull). To remove the power control card, see "Power control card removal" on page 133. 6. Reverse this procedure to install the midplane. 132 Netfinity Server HMM
Midplane removal
Note
Before beginning, see “Safety information” on
page 240.
1.
See “Removing the top cover” on page
136.
2.
Remove all three power supplies.
See “Hot-swap
power supply installation/removal” on page
92 for
instructions.
3.
Remove the two screws
±1²
at the top of the
midplane tray
±2²
which hold the midplane to the
server chassis.
4.
Lift the midplane up out of the chassis.
5.
Remove the eight screws
±6²
that hold the midplane
card
±7²
to the midplane tray.
The power control
card
±5²
will still be attached to the midplane by the
bracket
±4²
and
±3²
(orange pull).
To remove the
power control card, see “Power control card removal”
on page
133.
6.
Reverse this procedure to install the midplane.
132
Netfinity Server HMM