IBM 8681 Hardware Maintenance Manual - Page 111
after, right, under the tabs.
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
18 kg (37 lbs) 32 kg (70.5 lbs) Caution Use safe practices when lifting. 55 kg (121.2 lbs) 2. Move the slide-rail assemblies to the fully extended and locked position (all the way out of the rack). Note When the slide-rail assemblies are moved all the way out (fully extended), safety latches 1 lock the rails in place. To release the safety latches, press them in toward the server. 3. Lift the server and move it over the left slide-rail assembly first. Make sure that the slide-rail assembly is under the tabs 2 . The tabs are farther from the edge on the right side of the server to allow you to maneuver the slide-rail assembly under the right-side tabs after you have the slide-rail assembly under the left-side tabs. 4. Next, move the server over the right slide-rail assembly. Make sure that the slide-rail assembly is under the tabs. 5. Once the server is on both slide-rail assemblies, move it toward the rack. 6. Align the six holes 1 on the left slide-rail assembly with the matching holes on the left side of the server. 7. Install six screws through the left slide-rail assembly and into the server side. Tighten the screws. 8. Repeat steps 6 and 7 for the right slide-rail assembly. This secures the server. Netfinity 8500R - Type 8681 103