IBM 8681 Hardware Maintenance Manual - Page 203
FRU/Action, System Management
![]() |
UPC - 087944642503
View all IBM 8681 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Error Code/Symptom 161 (Real time clock battery error) 162 (Device Configuration Error) Important Be sure to load the default settings and any additional desired settings; then, save the configuration. 163 (Real-Time Clock error) 164 (Memory configuration changed) 173 (System CMOS checksum bad) 175 (Hardware error) 176 (Computer cover or cable cover was removed without a key being used) FRU/Action 1. Run Configuration/Setup 2. Battery, see "Battery replacement" on page 49. 3. I/O Function Card 1. Run Configuration/Setup 2. Battery, see "Battery replacement" on page 49. 3. Failing device identified by the displayed error message 4. I/O Board 5. Media Power Cable 1. Run Configuration/Setup 2. Battery, see "Battery replacement" on page 49. 3. I/O Function Card 1. If error 289 is displayed, follow instruction on screen. Verify failing FRU in system error log. 2. Run Configuration/Setup 3. DIMM 4. Memory Card 5. Processor Daughter Board 6. Processor Controller Board 1. Run Configuration/Setup 2. Battery, see "Battery replacement" on page 49. 3. I/O Function Card 1. System Management Adapter 2. I/O Board 3. Processor Daughter Board 4. Processor Controller Board 1. Run Configuration/Setup 2. Intrusion Cable (if in a tower configuration) 3. Front Panel Cable 4. Front Panel 5. I/O Function Card Netfinity 8500R - Type 8681 195
![](/manual_guide/products/ibm-8500r-hardware-maintenance-manual-603c304/203.png)