IBM 88643RU Service Guide - Page 72
sink-release
UPC - 000435958211
View all IBM 88643RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Air baffle Heat sink FRONT Microprocessor FRONT FRONT FRONT Microprocessor baffle VRM 4 1. Read the safety information that begins on page vii, and "Handling static-sensitive devices" on page 31. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables necessary to replace the device. 3. Remove the top cover and bezel (see "Removing the cover and bezel" on page 31). 4. Remove all fans (see "Hot-swap fan" on page 34). 5. Remove the memory cards (see "Removing and replacing a memory card" on page 41). 6. Lift the microprocessor-tray release latch. 7. Open the microprocessor-tray levers. Attention: The microprocessor tray is heavy. Pull the tray partially out of the server, and then reposition your hands to grasp the body of the tray, before pulling out the tray the rest of the way. 8. Remove the microprocessor tray. 9. Press in on the release latches on each side of the tray; then, pull the tray out the rest of the way. 10. Lift the air baffle out of the microprocessor tray. 11. Open the heat sink-release lever and remove the heat sink. 12. Open the microprocessor-release lever and remove the microprocessor from the microprocessor socket. 56 IBM System x3850 Type 8864: Problem Determination and Service Guide