IBM 88643RU Service Guide - Page 81
replaceable
UPC - 000435958211
View all IBM 88643RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See Chapter 3, "Parts listing, Type 8864," on page 23 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)", that step must be performed only by a trained service technician. Beep code Description Action 1-3-1 1st 64K RAM test failed. 1. Reseat the following components: a. DIMM b. Memory card 2. Replace the lowest-numbered pair of DIMMs with an identical known good pair of DIMMs; then, restart the server. If the beep code error remains, go to 3. Return one DIMM at a time from the failed pair to its connector, restarting the server after each DIMM, to identify the failed DIMM. 3. Replace the components listed in step 1 one at a time, in the order shown, restarting the server each time. 2-1-1 Secondary DMA register failed. 1. Reseat the I/O board. 2. Replace the I/O board. 2-1-2 Primary DMA register failed. 1. Reseat the I/O board. 2. Replace the I/O board. 2-1-3 Primary interrupt mask register failed. 1. Reseat the I/O board. 2. Replace the I/O board. 2-1-4 Secondary interrupt mask register failed. 1. Reseat the I/O board. 2. Replace the I/O board. 2-2-2 Keyboard controller failed. 1. Reseat the I/O board. 2. Replace the I/O board. 3-1-1 Timer tick interrupt failed. 1. Reseat the I/O board. 2. Replace the I/O board. 3-1-2 Interval timer channel 2 failed. 1. Reseat the I/O board. 2. Replace the I/O board. 3-1-4 Time-of-day clock failed. 1. Reseat the following components: a. Battery b. I/O board 2. Replace the components listed in step 1 one at a time, in the order shown, restarting the server each time. Chapter 5. Diagnostics 65