IBM HS22 User Guide - Page 62
Removing a CIOv-form-factor expansion card, metal surface
UPC - 883436054232
View all IBM HS22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
9. If you have other devices to install or remove, do so now; otherwise, go to "Completing the installation" on page 54. Removing a CIOv-form-factor expansion card Use these instructions to remove a CIOv-form-factor expansion card in the blade server. The following illustration shows how to remove a vertical-combination-I/O (CIOv) expansion card. To removel a CIOv expansion card, complete the following steps: 1. Before you begin, read "Safety" on page v and "Installation guidelines" on page 21. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Carefully lay the blade server on a flat, static-protective surface. 4. Open the blade server cover (see "Removing the blade server cover" on page 24 for instructions). 5. Touch the static-protective package that contains the expansion card to any unpainted metal surface on the BladeCenter unit or any unpainted metal surface on any other grounded rack component; then, remove the expansion card from the package. 6. Locate the CIOv expansion connector (see "Blade server connectors" on page 19). 7. Using your fingers, move the retaining clips away from the CIOv card; then, lift the card out of the connector. 48 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide