IBM HS22 User Guide - Page 66
Removing a storage interface card, If an optional expansion unit is installed
UPC - 883436054232
View all IBM HS22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removing a storage interface card Use this information to remove a storage interface card from the blade server. The storage interface card controls the SAS hot-swap storage drives. The following illustrations and installation instructions shows how to remove a ServeRAID-MR10ie CIOv storage interface card from the blade server. The illustrations and removal instructions are similar for other CIOv storage interface cards. To remove a storage interface card, complete the following steps. 1. Before you begin, read "Safety" on page v and "Installation guidelines" on page 21. 2. If the blade server is installed in a BladeCenter unit, remove it (see "Removing the blade server from the BladeCenter unit" on page 23 for instructions). 3. Remove the blade server cover (see "Removing the blade server cover" on page 24 for instructions). 4. If an optional expansion unit is installed, remove the expansion unit (see "Removing an optional expansion unit" on page 26). The storage-interface-card option includes the storage interface card, backup battery, and backup-battery cable. These parts can be removed separately from each other. 5. To remove the storage interface card, complete the following steps. a. Locate the storage interface card installed in the CIOv connector on the system board (see "Blade server connectors" on page 19). 52 BladeCenter HS22 Type 7870, 1936, and 1911: Installation and User's Guide