Icom ID-5100A Full Instruction Manual - Page 211

Previous view 10 VOICE MEMORY Changing the QSO recorder settings You can change the recording setting on the Menu screen. See "Voice Memo" item in the Menu screen (p. 12-17) for the setting details. • R ecords only the received audio. ("REC Mode") (Voice Memo > QSO Recorder > Recorder Set) • Synchronize the recording to PTT. ("PTT Auto REC") (Voice Memo > QSO Recorder > Recorder Set) The default setting is "TX&RX" (Both transmitted and received audio are recorded). • Continues to record even while the squelch is closed. ("RX REC Condition") (Voice Memo > QSO Recorder > Recorder Set) The default setting is "Squelch Auto" (Records only while the squelch is open.). • Records the QSO audio as one file. ("File Split") (Voice Memo > QSO Recorder > Recorder Set) The default setting is "OFF" (Recording is not synchronized to PTT.). For your reference: When "PTT Auto REC" is set to "ON": • Starts recording not only when PTT is pushed, but also when switched to transmit by the CI-V command. • When the "RX Only" is selected in "REC Mode," the transmit audio is not recorded. • A signal that is received within 10 seconds after the squelch is closed is recorded in same file. • Change the Skip Time. ("Skip Time") (Voice Memo > QSO Recorder > Player Set) • The default setting is "File Split" (transmitted and received audio are separately recorded in different files.). • When "Squelch Auto" is selected in "Recorder Set," an audio file is created every time the squelch opens. The received audio is recorded in a separated file. The default setting is "10sec." 10-4