Icom ID-5100A Full Instruction Manual - Page 53
VFO mode scan
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Previous view 4 SCAN OPERATION VFO mode scan There are 6 scan types: Full scan, Band scan, Program scan, Program link scan, Duplex scan and Tone scan. NOTE: The frequencies that are set as skip channels "PSKIP" are skipped during a scan. When the "Program Skip" item in the Menu screen is set to OFF, the frequencies that are set as skip channels "PSKIP", are not skipped during a scan. (Scan > Program Skip) DDVFO mode scan qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [VFO]. • Selects the VFO mode. eeTouch the MHz digits. • Opens the operating band setting window. rrTouch the desired operating band. ttTouch the Mode icon. • Opens the operating mode setting window. yyTouch a desired operating mode. uuTouch the Function group icon one or more times. • Selects the F-1 menu. iiTouch [SCAN]. • Opens the scan type setting window. !0 The scan starts. • If desired, rotate [DIAL] during a scan to switch the scanning direction. • If desired, touch the Mode icon during a scan to change the operating mode. • The scan runs even while the Menu or Quick Menu screen is displayed. During a Band scan Blinks Blinks Displays the scan type When receiving a signal ooTouch the desired scan type. • ALL: Full scan • BAND: Band scan • P-LINK0-9: Program link scan • P00-24: Program scan • DUP: Duplex scan (p. 4-2) (Appears only when duplex is set.) • TONE: Tone scan (For tone squelch scanning) Blinks Blinks The S-meter shows the received signal strength. !1 To cancel the scan, touch [SCAN]. • Touching the frequency readout also cancels the scan. About Program scan You can set the tuning step and the operating mode used for a program scan or program link scan. See page 4-12 for details. 4-5