Icom ID-5100A Full Instruction Manual - Page 302
Power OFF, Pull out, NEVER
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Previous view 13 OTHER FUNCTIONS Cloning function DDTransceiver-to-Transceiver cloning using an SD card (Continued) yyTouch [YES]. 3. Loading the setting data into the sub transceiver. !1 Touch [MENU]. !2 Touch "Load Setting." (SD Card > Load Setting) • If the item is not displayed, touch [∫] or [√] one or more times to select another page. • While saving, a progress bar is displayed, and then the "SD CARD" screen is displayed after the save is completed. !3 Touch the desired setting file. uuTouch [MENU]. • Closes the Menu screen. 2. Remove the SD card from the master transceiver, and then insert it into the sub transceiver. iiHold down the master transceiver's [ ] to turn OFF the power. ooRemove the SD card from the master transceiver. Power OFF Push Push in the SD card until a click sounds. Pull out !0 Insert the SD card into the sub transceiver, then hold down the sub transceiver's [ ] to turn ON the power. NEVER forcibly or inversely insert the card. It will damage the card and/or the slot. !4 Touch the desired content to load it. • ALL: Loads all memory channels, item settings in the menu list and the repeater list into the transceiver. • Except My Station: Loads all memory channels, the repeater list, and item settings in the Menu screen except MY call signs, into the transceiver. • Repeater List Only: L oads only the repeater list into the transceiver. • The "Keep 'SKIP' setting in Repeater List?" appears. !5 Touch "YES" or "NO." • When "Yes" is selected, the skip setting of the repeater list is retained. (p. 7-29) 13-13