Icom ID-5100A Full Instruction Manual - Page 341
◇ Display, ◇ Scanning
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
Previous view 17 MAINTENANCE Troubleshooting DDTransmit and receive (Continued) PROBLEM POSSIBLE CAUSE SOLUTION REF. No contact can be made with • Duplex function are ON, and the trans- • Turn OFF the Duplex function. another station. mit and receive frequencies are differ- ent. p. 11-4 The displayed frequency is • The CPU has malfunctioned. • Reset the transceiver. p. 17-2 erroneous. • External factors have caused the fault. • Disconnect and connect to the DC - power supply. Cannot receive on the SUB • The SUB band mute is activated. band. • T urn OFF the function. p. 12-61 DDDisplay PROBLEM POSSIBLE CAUSE SOLUTION The displayed frequency • The Lock function is ON. • T urn OFF the function. does not change. • T he Memory or Call channel is select- • T ouch [VFO] to select the VFO mode. ed. • The DR screen is displayed. • T ouch [DR] to cancel the DR function. REF. p. 2-13 p. 2-9 p. 2-9 DDScanning PROBLEM POSSIBLE CAUSE SOLUTION REF. A Programmed scan does • T he VFO mode is not selected. • T ouch [VFO] to select the VFO mode. p. 2-9 not start. • The same frequencies are entered into • Enter different frequencies into the the scan edges. scan edges. A Memory scan does not • T he Memory mode is not selected. • T ouch [V/M] to select the Memory p. 2-9 start. mode. • 2 or more memory channels have not • Program more than 2 memory chan- p. 3-6 been programmed. nels. 17-6