Icom ID-5100A Full Instruction Manual - Page 98

Previous view 6 D-STAR OPERATION "FROM" (Access repeater) setting Your access repeater must be set in "FROM" when you make a call in the DR screen. You have five ways to set the access repeater. Setting by [DIAL] Select the preset repeater by rotating [DIAL] while displaying the DR screen. • When you know your access repeater From the repeater list (p. 6-20) When your access repeater is in your transceiver's repeater list, you can select it by selecting the repeater area and name, if entered, or call sign. • When you don't know which repeater you can access. Search for a repeater using the DR scan function (p. 6-21) The Normal scan searches for, and stops on, input and output repeater frequencies, when a signal is detected. • The scan will also stop on simplex signals. The Near Repeater scan searches for up to 20 nearby repeaters by using your location and the repeater's location, and then lists them. You can find only FM repeaters using the Near Repeater (FM) scan. Search for the nearest repeater (p. 6-21) Searches for the nearest repeater by using your location and the repeater's location. The nearest repeaters in your transceiver's repeater list are displayed as the selectable choices. • When the "FROM" data is stored in the TX History. Setting from the TX History (p. 6-22) Select a repeater that you have accessed before, from the TX History record. 6-18 Displayed while rotating [DIAL] Scan items