Icom ID-5100A Full Instruction Manual - Page 55
Setting and clearing the skip frequencies, ◇ Setting the skip frequencies
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Previous view 4 SCAN OPERATION Setting and clearing the skip frequencies DDSetting the skip frequencies The frequencies set as "PSKIP" skip channels are not scanned. qqStart the VFO scan. (p. 4-5) • When a signal is received, the scan pauses. DDClearing the skip frequencies qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [MR]. • Selects the Memory mode. eeRotate [DIAL] to select the memory channel you want to clear as the skip channel. Blinks Blinks The S-meter shows the received signal strength. wwTouch the Function group icon one or more times. • Selects the F-2 menu. eeWhile the scan is paused, and if you want to skip the frequency, touch [SKIP] for 1 second (until 3 beeps sound). • When a signal is received during the scan, the transceiver attempts to enter the frequency as a skip channel into empty memory channel 999. • The entered memory channel number blinks. • If channel 999 already has content, the transceiver automatically searches for another blank channel to use. If no blank memory channel is found, a beep sounds, and no skip channel is set. rrTouch the Function group icon one or more times. • Selects the F-2 menu. ttTouch [SKIP]. • Open the skip setting window. yyTouch "OFF." Blinks A skip frequency is entered into channel 999. rrAfter the skip channel is set, the scan resumes. • The skip setting is canceled. "PSKIP" disappears. For your reference: The skip setting is also cancelled when the memory channel set as skip channel is deleted. See page 3-16 for details. 4-7