Icom ID-5100A Full Instruction Manual - Page 275
MENU SCREEN, Default setting, Available, N/A: Not available, Function items Continued
![]() |
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Previous view 12 MENU SCREEN Function items (Continued) • During RX/Standby: ●: Default setting : Available N/A: Not available Function Description Remote MIC Key Up/Down MIC Key [F-1] [F-2] [UP] [DN] --- No function UP Push to increase the frequency, Memory channel, repeater or station call sign. N/A N/A ● DOWN Push to decrease the frequency, Memory channel, repeater or station call sign. N/A N/A ● VOL UP Push to increase the volume level. VOL DOWN Push to decrease the volume level. N/A N/A N/A N/A SQL UP Push to increase the squelch level. SQL DOWN Push to decrease the squelch level. N/A N/A N/A N/A Monitor Push to open or close the squelch. ● CALL Push to select a call channel. N/A N/A MR (000 CH) In the Memory mode, push to select Memory channel 000. MR (001 CH) In the Memory mode, push to select Memory channel 001. VFO/MR Push to toggle between the VFO mode and the Memory mode. N/A N/A DR Push to turn the DR function ON or OFF. FROM/TO (DR) In the DR screen, push to toggle between "FROM" and "TO." Push to directly select the Home CH that is set to the selected Home CH mode (VFO/Memory) or DR screen. While in the CALL CH or weather channel mode, or when no N/A N/A Home CH is set, an error beep sounds. Push to select an operating band. BAND/BANK In the VFO mode, push to change the operating band, and in the Memory Bank mode, push to select Bank A to Z, or OFF. ● • Only the programmed bank appears. SCAN Push to start a scan. While scanning, push to stop the scan. Temporary Skip Push to set the frequency to be skipped during scanning. The selected frequencies are temporarily skipped for faster scanning. RX>CS Hold down for 1 second to set the last calling station call sign to "TO" (destination). Push to announce the frequency, operating mode or call sign. - In the VFO, Memory and Call channel mode, the frequency and SPEECH the operating mode are announced. - In the DR screen, the call sign is announced. If Simplex is se- lected, the frequency is announced. While in the single display mode, push the key to toggle between the A Band and B Band. MAIN/DUAL While in the dual display mode, push the key to toggle between the MAIN Band and SUB Band. N/A N/A Hold down the key to toggle between the single display and the dual display. MODE Push to change the operating mode. LOW DUP PRIO Push to change the transmit power level. Push to turn the Duplex mode ON or OFF, and the shift direction to DUP+ or DUP-. Push to turn the Priority watch ON or OFF. 12-53 ☞☞Continued on the next page
![](/manual_guide/products/icom-id5100a-instruction-manual-fa43d95/275.png)