Icom ID-5100A Full Instruction Manual - Page 57
◇ Memory bank scan, When a bank name is assigned.
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Previous view 4 SCAN OPERATION Memory scan (Continued) DDMemory bank scan A memory bank scan searches through the memory channels in the selected bank. • Two or more memory channels, which are not set as skip chan- nels, must be programmed to start a memory bank scan. • When the "Bank Select" item in the Quick Menu screen is set to "OFF," a bank scan is not started. qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [MR]. • Selects the Memory mode. eeTouch the Function group icon one or more times. • Selects the F-1 menu. rrTouch [SCAN]. • Opens the scan type setting window. yyThe scan starts. • If desired, during a scan, rotate [DIAL] to switch the scanning direction. • The scan runs even while the Menu or Quick Menu screen is displayed. During a Memory bank scan Blinks ttTouch the desired scan type. • ALL: Full bank scan • BANK-LINK: Bank link scan • BANK-A to Z: Bank scan (Only banks which contain a memory chan- nel are displayed.) • DUP: Duplex scan (p. 4-2) (Appears only when duplex is set on the channel.) • TONE: Tone scan (For tone scanning) Blinks When receiving a signal Blinks Blinks The S-meter shows the received signal strength. uuTo cancel the scan, touch [SCAN]. • Touching the frequency readout also cancels the scan. When a bank name is assigned. When a bank name is assigned, the bank name is displayed on the scan type setting window. NOTE: The scan name is not displayed during a scan. Bank name NOTE: • When all channels are set as "SKIP" or "PSKIP," the bank will be skipped during a bank link scan. • When all channels in the selected bank are set as "SKIP" or "PSKIP," the scan does not start during a bank scan. 4-9