Icom ID-5100A Full Instruction Manual - Page 322
VOX function, ◇ Using the VOX function, ◇ Setting the VOX level
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
Previous view 15 Bluetooth® OPERATION VOX function The VOX (Voice-Operated Transmission) function toggles the transceiver between transmit and receive by your voice. This function provides hands-free operation. You can use the VOX function with the optional VS-3 or a third party's Bluetooth® headset. Depending on the headset, the VOX function may be disabled because of the differences in microphones. DDUsing the VOX function qqTouch [MENU]. wwTouch "VOX." (Bluetooth Set > Headset Set > VOX > VOX) • If the item is not displayed, touch [∫] or [√] one or more times to select another page. If the transceiver does not connect to a Bluetooth® headset, you cannot use the VOX function, even if the "VOX" item is set to ON. Be sure to check the Bluetooth® connection between the transceiver and the headset before using the VOX function. DDSetting the VOX level qqTouch [MENU]. wwTouch "VOX Level." (Bluetooth Set > Headset Set > VOX > VOX Level) • If the item is not displayed, touch [∫] or [√] one or more times to select another page. eeTouch "ON." rrTouch [MENU]. • Closes the Menu screen. • "VOX" appears. Appears eeWhile speaking into the headset microphone, touch [+] or [-] to adjust the VOX level. • The VOX level can be adjusted between 1 (minimum) and 10 (maximum), or turned OFF. (Default: 5) • Higher values make the VOX function more sensitive to your voice. • "VOX" appears above [+] when the TX level audio is in- put. "VOX" appears rrTouch [MENU]. • Closes the Menu screen. • If the S-meter does not display the output power level, and the transceiver does not transmit, set the VOX delay time in the Menu screen. (p. 12-64) (Bluetooth Set > Headset Set > VOX > VOX Delay) • When the VOX function is ON, you can adjust the VOX level by pushing [+] or [-] on the VS-3 while transmitting. • When the VOX function is ON, you can adjust the VOX level by rotating [DIAL] while transmitting. NOTE: During receiving a signal or sounding a beep, the transceiver does not switch to transmit by your voice. NOTE: We recommend you set the microphone gain in the Menu screen or the headset, before setting the VOX level. (Function > MIC Gain) 15-8