Icom ID-5100A Full Instruction Manual - Page 266
DV Set items, RX Bass, RX Treble, RX Bass Boost
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
Previous view 12 MENU SCREEN DV Set items RX Bass (Default: Normal) DV Set > Tone Control > RX Bass Set the received audio bass filter level to Cut, Normal or Boost. • Cut: Reduces the low frequencies • Normal: N ormal tone balance • Boost: Increases the high frequencies RX Treble (Default: Normal) DV Set > Tone Control > RX Treble Set the received audio treble filter level to Cut, Normal or Boost. • Cut: Reduces the high frequencies • Normal: N ormal tone balance • Boost: Increases the high frequencies RX Bass Boost (Default: OFF) DV Set > Tone Control > RX Bass Boost Turn the received audio Bass Boost function ON or OFF. This function is separate from the "Boost" setting of the RX Bass. • OFF: T urns OFF the function. • ON: This function boosts the received audio bass. TX Bass (Default: Normal) DV Set > Tone Control > TX Bass Set the transmit audio bass filter level to Cut, Normal or Boost. • Cut: Reduces the low frequencies • Normal: N ormal tone balance • Boost: Increases the low frequencies TX Treble (Default: Normal) DV Set > Tone Control > TX Treble (TX Treble) Set the transmit audio treble filter level to Cut, Normal or Boost. • Cut: Reduces the high frequencies • Normal: N ormal tone balance • Boost: Increases the high frequencies Auto Reply (Default: OFF) DV Set > Auto Reply Set the automatic reply function to ON, OFF, Voice, Position (Main Only), or Position (Main/Sub). This function automatically replies to a call addressed to your own call sign, even if you are away from the transceiver. • OFF: Turns OFF the function. • ON: Replies with your own call sign. (No audio re- ply is sent) • Voice: Replies with your call sign and any Auto Reply message recorded on the SD (up to 10 seconds). If no SD card is inserted, or no message is recorded, only your call sign is transmitted. The transmitted audio can be monitored. • Position (Main Only): Replies with your own call sign and transmits your position using the internal GPS receiver. In the Dualwatch mode, automatically replies only when the signal is received on the MAIN band. - When the "GPS Select" item is set to "OFF" or "Manual," the internal GPS receiver is temporarily turned ON. • Position (Main/Sub): Replies with your own call sign and transmits your position using the internal GPS receiver. In the Dualwatch mode, automatically replies when the signal is received on either the Main or Sub band. - When the "GPS Select" item is set to "OFF" or "Manual," the internal GPS receiver is temporarily turned ON. NOTE: • When "ON" or "Voice" is selected, the Automatic re- ply function is automatically turned OFF when you push [PTT]. • When "Position (Main Only)" or "Position (Main/ Sub)" is selected, the Automatic reply function is not turned OFF, even if you push [PTT]. DV Data TX (Default: Auto) DV Set > DV Data TX Select whether to manually or automatically transmit slow-speed data. • PTT: Push [PTT] to manually transmit the data. • Auto: W hen data is input from a PC through the [DATA] jack, the transceiver automatically transmits it. 12-44