Icom ID-5100A Full Instruction Manual - Page 234
DUP/TONE items, Offset frequency, Repeater Tone, TSQL Freq, Tone Burst, Digital Code
![]() |
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Previous view 12 MENU SCREEN DUP/TONE items Offset frequency (Default: 0.600.00*) DUP/TONE... > Offset Freq Set the frequency offset for duplex (repeater) operation to between 0 and 59.99500 MHz. • The duplex shift direction (DUP-/DUP+) is set in the duplex setting window that is displayed when you touch [DUP] in the F-3 menu. • If the DR function is selected before selecting this item, editing is restricted. *The default value may differ, depending on the frequency band (selected as the Main band before entering the Menu screen) and the transceiver version. Repeater Tone (Default: 88.5) DUP/TONE... > Repeater Tone Select a CTCSS tone frequency for repeater access and other functions. 50 tone frequencies (67.0-254.1 Hz) are selectable. TSQL Freq (Default: 88.5) DUP/TONE... > TSQL Freq Select a CTCSS tone frequency for the tone squelch or the Pocket beep function. 50 frequencies (67.0-254.1 Hz) are selectable. • Selectable repeater tone/tone squelch frequencies (Unit: Hz) 67.0 085.4 107.2 136.5 165.5 186.2 210.7 254.1 69.3 088.5 110.9 141.3 167.9 189.9 218.1 71.9 091.5 114.8 146.2 171.3 192.8 225.7 74.4 094.8 118.8 151.4 173.8 196.6 229.1 77.0 097.4 123.0 156.7 177.3 199.5 233.6 79.7 100.0 127.3 159.8 179.9 203.5 241.8 82.5 103.5 131.8 162.2 183.5 206.5 250.3 Tone Burst (Default: OFF) DUP/TONE... > Tone Burst Turn the Tone Burst function ON or OFF in the FM mode when using tone squelch. • OFF: When you transmit a signal that superimposes the CTCSS tone, the other station may hear a short burst of noise from their receiver, just after you stop transmitting. • ON: When you transmit a signal that superimposes the CTCSS tone, the function mutes the noise from being heard in the other station's receiver. DTCS Code (Default: 023) DUP/TONE... > DTCS Code Select a DTCS (both encoder/decoder) code for the DTCS squelch. A total of 104 codes (023-754) are selectable. • Selectable DTCS codes 023 072 152 244 311 412 466 631 025 073 155 245 315 413 503 632 026 074 156 246 325 423 506 654 031 114 162 251 331 431 516 662 032 115 165 252 332 432 523 664 036 116 172 255 343 445 526 703 043 122 174 261 346 446 532 712 047 125 205 263 351 452 546 723 051 131 212 265 356 454 565 731 053 132 223 266 364 455 606 732 054 134 225 271 365 462 612 734 065 143 226 274 371 464 624 743 071 145 243 306 411 465 627 754 DTCS Polarity (Default: Both N) DUP/TONE... > DTCS Polarity Select the DTCS polarity to use for transmitting and receiving. • Both N: Normal polarity is used for both TX and RX. • TN-RR: Normal polarity is used for TX; Reverse polar- ity for RX. • TR-RN: Reverse polarity is used for TX; Normal polar- ity for RX. • Both R: Reverse polarity is used for both TX and RX. DTCS code's polarity for transmitting or receiving can be independently set with this item. Digital Code (Default: 00) DUP/TONE... > Digital Code Select the desired digital code for digital code squelch. A total of 100 codes (00-99) are selectable. 12-12
![](/manual_guide/products/icom-id5100a-instruction-manual-fa43d95/234.png)