Icom ID-5100A Full Instruction Manual - Page 52

Previous view 4 SCAN OPERATION Scan (Continued) DDWhen a signal is received When a signal is received, the scan pauses for approximately 10 seconds (default), then resumes. The scan resumes approximately 2 seconds (default) after the signal disappears. To manually resume the scan, rotate [DIAL]. • These settings can be changed in the Menu screen. (p. 12-14) (Scan > Pause Timer) (Scan > Resume Timer) Blinks Blinks DDScan function during Dualwatch mode When the DV signal is simultaneously received on both MAIN and SUB bands, the SUB band audio signal is muted. Example: While receiving a DV signal on the MAIN band, the transceiver receives other DV signal on the SUB band. You can hear only the MAIN band audio. MAIN band SUB band The S-meter shows the received signal strength. DDScan name A desired name can be assigned to each Program scan edge or Program scan link channel. (p. 4-12) By selecting the scan name, the scanning frequency range will be set. The SUB band audio signal is muted. Example: While waiting for a DV signal on the MAIN band, the transceiver receives another signal from a DV repeater on the SUB band. You can hear the SUB band audio. MAIN band SUB band Scan name The scan type setting window DDScan Stop Beep function The Scan Stop Beep function sounds a beep when a signal is received. The function can be turned ON or OFF in the Menu screen. (p. 12-61) (Sounds > Scan Stop Beep) When receiving a signal The S-meter shows the received signal strength. Blinks Blinks Beep Signal is not received. 4-4