Icom ID-5100A Full Instruction Manual - Page 63

Previous view 5 PRIORITY WATCH Priority watch While operating on a VFO frequency, DR function or while scanning, Priority watch checks for signals on a selected frequency every 5 seconds. DDVFO frequency and a priority channel (p. 5-4) Checks the selected priority channel every 5 seconds, while receiving on a VFO frequency. A Memory channel, Bank channel or Call channel can be selected as the priority channel • VFO frequency and a Memory channel VFO mode Receiving (5 seconds) Selected M-CH • VFO frequency and a Bank channel VFO mode Receiving (5 seconds) Selected Bank CH • VFO frequency and a Call channel VFO mode Receiving (5 seconds) CALL-CH While in the Dualwatch mode, Priority watch can be activated on both the MAIN and SUB band. When the DV signal is simultaneously received on both MAIN and SUB band, the SUB band audio signal is muted. DDVFO scan and a priority channel (p. 5-8) Checks the selected priority channel every 5 seconds, during a VFO mode scan. A Memory channel, Bank channel or Call channel can be selected as the priority channel • VFO scan and a Memory channel VFO mode Scan (5 seconds) Selected M-CH • VFO scan and a Bank channel VFO mode Selected Bank CH Scan (5 seconds) • VFO scan and a Call channel VFO mode Scan (5 seconds) CALL-CH DDVFO frequency and a Memory/Bank scan (p. 5-6) Sequentially checks the Memory or Bank channels every 5 seconds, while receiving on a VFO frequency. A Memory scan or Bank scan can be selected. DDVFO scan and a Memory/Bank scan (p. 5-10) Sequentially checks the Memory or Bank channels every 5 seconds during a VFO mode scan. A Memory scan or Bank scan can be selected. • VFO frequency and a Memory scan VFO mode SKIP Receiving (5 seconds) 0 1 2 999 M-CH • VFO frequency and a Bank scan 00 VFO SKIP 01 mode 02 Receiving (5 seconds) 99 Bank CH • VFO scan and a Memory scan VFO mode SKIP Scan (5 seconds) 0 1 2 999 M-CH • VFO scan and a Bank scan 00 VFO SKIP 01 mode 02 Scan (5 seconds) 99 Bank CH 5-2