Icom ID-5100A Full Instruction Manual - Page 291

Previous view 13 OTHER FUNCTIONS Voice TX function The Voice TX function transmits the audio that is on the SD card, one time or repeatedly, for up to 10 minutes at the specified interval. Up to 4 memories can be used for repeatedly calling CQ or for other events. When the key function [Voice TX (T1)] is assigned to a microphone key, push the key to transmit the stored audio in the [T1] (Voice memory number for TX). (p. 1254) NOTE: Be sure to first insert an SD card into the transceiver. DDRecording the voice audio qqTouch [MENU]. wwTouch "Record." (Others > Voice TX > Record) • If the item is not displayed, touch [∫] or [√] one or more times to select another page. • Displays the "VOICE TX RECORD" screen. eeTouch the desired memory, [T1] through [T4]. rrTouch [●] to start recording. • The maximum record time is 1 minute. • Hold the microphone 5 to 10 cm (2 to 4 inches) from your mouth, then speak at a normal voice level. Recording time Appears while recording Audio level Save and return ttTouch [■] to stop recording. yyTouch [≈] to playback the recorded audio. • The "VOICE TX RECORD (T1)" screen is displayed when [T1] memory is selected. Mic gain adjustment Record Stop Playback • If you touch [●], the recording starts again. In this case, the previous recorded audio will be overwritten. uuTouch []. • Returns to the "VOICE TX RECORD" screen. Recording time For your reference: Touch [MIC GAIN] to open the "MIC GAIN" setting window. Touch [+] or [-] to adjust the Mic gain. 13-2