Icom ID-5100A Full Instruction Manual - Page 220

Previous view 11 REPEATER AND DUPLEX OPERATIONS Duplex operation The Duplex operation shifts the transmit frequency up or down from the receive frequency by an offset amount. DDSetting the frequency offset qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [VFO]. • Selects the VFO mode. eeTouch [MENU]. rrTouch "Offset Freq." (DUP/TONE... > Offset Freq) DDSetting the duplex direction qqTouch the Function group icon one or more times. • Selects the F-3 menu. wwTouch [DUP]. • Opens the duplex direction setting window. ttTouch the numbers to enter the desired offset. (Example: 0.700.00 MHz) • Between 0.000.00 and 59.99500 MHz. • The selected tuning step in the VFO mode is used when setting the frequency offset. • If desired, touch "CE" to delete the entry. eeTouch the desired option. • OFF: For simplex operation (the receive and transmit frequencies are the same). • DUP-: T he transmit frequency shifts down from the receive frequency by the offset amount. • DUP+: T he transmit frequency shifts up from the receive frequency by the offset amount. • After setting, "DUP-" or "DUP+" appears. yyTouch [ENT] to set the offset. • Exits from the "Offset Freq" screen. • Sets the offset. uuTouch [MENU]. • Closes the Menu screen. NOTE: The frequency offset cannot be changed in the DR function. For your reference: If the offset value will cause the transmit frequency to be out of the band, "OFF BAND" appears on the display when [PTT] is pushed, and transmit will be inhibited. (p. 11-5) DDDuplex operation qqTouch [MONI] to listen to the transmit frequency to check whether another station is transmitting on it, or not. • The transceiver transmit frequency appears on the display. wwTouch [MONI] again to turn OFF monitoring, and then operate in the normal way. NOTE: When the Auto repeater is ON, and the operating frequency is set out of the repeater output frequency range, the duplex mode is automatically cancelled. 11-4