Icom ID-5100A Full Instruction Manual - Page 226

Previous view 12 MENU SCREEN Menu items and Default settings (Continued) NOTE: The default settings shown in bold letters below are for the USA version. The default settings may differ, depending on your transceiver version. DV Auto Reply*1 Records a voice audio to use the Auto Reply function in the DV mode. Voice TX Record*1 TX Set Repeat Time TX Monitor *1 Set microphone voice recording options. T1~T4 Starts recording the microphone audio. 1sec~5sec~15sec OFF or ON T1~T4, Repeat TX Sets the repeat interval. The transceiver repeatedly transmits the recorded voice audio at this interval. The TX Monitor function outputs the TX voice audio from the speaker during voice transmission. The transceiver transmits the recorded voice audio. GPS GPS Set GPS Select Manual Position GPS Out (To DATA Jack) GPS TX Mode OFF D-PRS Unproto Address TX Format Position Symbol SSID Comment Time Stamp Altitude Data Extension Power Height Gain Directivity Object Object Name Data Type Symbol Comment Position Data Extension Course Speed Power Height Gain Set the GPS options. OFF, Internal GPS or Manual OFF or ON API510,DSTAR* Selects the position data source that the transceiver uses for its position data. Manually enter your current position. Selects to output the GPS information to the [DATA] jack Turns OFF the GPS TX function. Enters an unproto address, or keep the default. 1:Car, 2:Van, 3:Truck or 4:House QTH (VHF) Selects a desired D-PRS Symbol to transmit. - - -, (-0), -1~-15 or -A~-Z Selects the APRS® call sign SSID. Enters a comment to transmit. OFF, DHM or HMS Selects a format to transmit the current UTC time as a time stamp. OFF or ON Turns the altitude transmit option ON or OFF. OFF, Course/Speed or Selects whether to transmit the course/speed data, Power/Height/Gain/Directivity power/height/gain/directivity data or not. 0W, 1W, 4W, 9W, 16W, 25W, 36W, Selects the TX power level information to send when 49W, 64W or 81W using as a base station. 10ft, 20ft, 40ft, 80ft, 160ft, 320ft, Selects the height information to send when using as 640ft, 1280ft, 2560ft, 5120ft*2 a base station. 0dB~9dB Selects the antenna gain information to send when using as a base station. Omni, 45°NE, 90°E, 135°SE, 180°S, Selects the antenna directivity information to send 225°SW, 270°W, 315°NW, 360°N when using as a base station. Enters a object station name to transmit. Live Object, Killed Object Selects a object station's status to transmit. Radio Selects a object station's symbol to transmit. Enters a object station's comment to transmit. Sets a object station's position data to transmit. OFF, Course/Speed or Selects whether to transmit the object station's course/ Power/Height/Gain/Directivity speed data, power/height/gain/directivity data or not. 0°~360° Sets a object station's course to transmit. 0mph~1150mph*2 Sets a object station's speed to transmit. 0W, 1W, 4W, 9W, 16W, 25W, 36W, Selects a object station's TX power level information 49W, 64W or 81W to transmit. 10ft, 20ft, 40ft, 80ft, 160ft, 320ft, Selects the height information of the object station 640ft, 1280ft, 2560ft, 5120ft*2 to transmit. 0dB~9dB Selects the antenna gain information of the object station to transmit. *1 Be sure to insert the SD card into the transceiver before selecting these items. *2 The unit may differ, depending on the "Display Unit" settings. (p. 12-59) 12-4