Icom ID-5100A Full Instruction Manual - Page 287

Previous view 12 MENU SCREEN Bluetooth Set items (Continued) Power Save (Default: OFF) Bluetooth Set > Headset Set > Icom Headset > Power Save Select whether or not to operate with the power save mode while the optional VS-3 Bluetooth® headset is connected. When a third-party headset or a data device is connected, the power save mode is automatically turned OFF, regardless of this setting. • OFF: Turns OFF the function. • ON: The Power Save mode is enabled when no com- munication or operation is performed for 120 seconds. One-Touch PTT (Default: OFF) Bluetooth Set > Headset Set > Icom Headset > One-Touch PTT Set the One-Touch PTT function while the optional VS-3 Bluetooth® headset is connected. The function enables you to transmit without continuously holding down [PTT]. When a third-party headset is connected, this function is automatically turned ON, regardless of this setting. • OFF: Transmits while holding down [PTT]. • ON: Pushing [PTT] toggles transmission and recep- tion. PTT Beep (Default: OFF) Bluetooth Set > Headset Set > Icom Headset > PTT Beep Set the beep sound when you push [PTT] on the optional VS-3 Bluetooth® headset. • OFF: No beep sounds. • ON: A beep sounds. Custom Key Beep (Default: OFF) Bluetooth Set > Headset Set > Icom Headset > Custom Key Beep Set the beep sound when you push the Custom Key ([PLAY]/[FWD]/[RWD]) on the optional VS-3 Bluetooth® headset. • OFF: No beep sounds. • ON: A beep sounds. Custom Key (Default: [PLAY]: ---, [FWD]: UP, [RWD]: DOWN) Bluetooth Set > Headset Set > Icom Headset > Custom Key Assigns the following key functions to the Custom Key ([PLAY]/[FWD]/[RWD]) on the optional VS-3 Bluetooth® headset. Function Description --- No function UP DOWN Push to increase the frequency, Memory channel, repeater or select the next station call sign. Push to decrease the frequency, Memory channel, repeater or select the previous station call sign. VOL UP Push to turn up the volume level. VOL DOWN Push to turn down the volume level. SQL UP Push to turn up the squelch level. SQL DOWN Push to turn down the squelch level. Monitor Push to open or close the squelch. CALL Push to select a call channel. MR (000 CH) MR (001 CH) VFO/MR In the Memory mode, push to select Memory channel 000. In the Memory mode, push to select Memory channel 001. Push to toggle between the VFO mode and the Memory mode. DR Push to turn the DR function ON or OFF. FROM/TO (DR) In the DR screen, "FROM" and "TO." push to toggle between Push to directly select the Home CH that is HOME CH set to the selected mode (VFO/Memory) or DR screen. While in the CALL CH or weather channel mode, or when no Home CH is set, an error beep sounds. Push to select an operating band. In the VFO mode, push to change the oper- BAND/BANK ating band, and in the Memory Bank mode, push to select a bank (OFF or A to Z). SCAN Temporary Skip RX>CS • Only the programmed bank appears. Push to start the scan. While scanning, push to stop the scan. Push to set the frequency to be skipped during scanning. The selected frequencies are temporarily skipped for faster scanning. Hold down for 1 second to set the last calling station call sign to "TO" (destination). 12-65 ☞☞Continued on the next page.