Icom ID-5100A Full Instruction Manual - Page 38

Previous view 3 MEMORY OPERATION Writing into a Memory channel After setting a frequency in the VFO mode, you can write it into a Memory channel. When writing into a channel, you can select the destination channel between your desired channel or the lowest blank channel. Memory channels 002 to 999 are blank as the default. DDWriting into the selected channel Example: Writing 146.030 MHz into Memory channel 18. qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [VFO]. • Selects the VFO mode. eeRotate [DIAL] to set 146.030 MHz. rrTouch the Function group icon one or more times. • Selects the F-1 menu. ttTouch [MW]. ooTouch [WRITE]. !0 Touch [YES]. • Beeps sound. • Writes into the selected Memory channel, and returns to the VFO mode. yyTouch [Write to New CH]. • Opens the "WRITE" screen. uuTouch [CH SEL]. iiTouch "018." NOTE: If you select a pre-entered channel, the previous channel content will be overwritten. • Call channels are also selectable. DDWriting into a blank channel Example: Writing 146.030 MHz into a blank channel. qqTouch the Memory channel number. • Opens the Mode setting window. wwTouch [VFO] to select the VFO mode. eeRotate [DIAL] to set 146.030 MHz. rrTouch the Function group icon one or more times. • Selects the F-1 menu. ttTouch [MW] for 1 second. • Writes into the smallest blank, and returns to the VFO mode. 3-6