Icom ID-5100A Full Instruction Manual - Page 258

Previous view 12 MENU SCREEN GPS items (Continued) GPS Logger (Default: OFF) GPS > GPS Logger > GPS Logger Turn the GPS Logger function ON or OFF. This function logs the position, altitude, course, speed and number of satellites being used. • OFF: Turns OFF the function. • ON: The transceiver automatically logs GPS data. Once this function is turned ON, the GPS data will be continuously logged until turning it OFF, even if the transceiver power is turned OFF, then ON again. To use this function: 1. You must first insert an SD card into the trans- ceiver. 2. You must select "GPS select" for the "Internal GPS" item. NOTE: The log data will be saved on the SD card. The file name is automatically created, as shown in the example: Log start date and time: 2014/4/1 15:30:00 File name: 20140401_153000.log Record Interval (Default: 5sec) GPS > GPS Logger > Record Interval Select the GPS Logger function record interval of 1, 5, 10, 30, or 60 seconds. GPS Auto TX (Default: OFF) GPS > GPS Auto TX Select an option for the GPS automatic transmission function. This function automatically transmits the current position data received from a GPS receiver, as well as any programmed GPS message, at the selected interval. • OFF: Does not automatically transmit the position data. (When you push [PTT], the transceiver transmits the position data.) • 5 sec to 30 min: T ransmits the current position data at the selected interval (5*, 10, or 30 seconds, or 1, 3, 5, 10, or 30 minutes). *Does not appear when you set four GPS sentences in "GPS Sentence." NOTE: When the GPS transmit mode is "NMEA," set the "GPS Select" item to "Internal GPS." If you set to "Manual" or "OFF," the current position data will not be automatically transmitted. 12-36