Icom ID-5100A Full Instruction Manual - Page 274
Function items, Squelch/ATT Select, Squelch Delay, Fan Control, Remote MIC Key, Up/Down MIC Key
![]() |
View all Icom ID-5100A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Previous view 12 MENU SCREEN Function items Squelch/ATT Select (Default: S-Meter Squelch) Function > Squelch/ATT Select Select the function that varies according to the [SQL] control position. • OFF: Both the S-Meter Squelch and At- tenuator are disabled. • S-Meter Squelch: The S-Meter Squelch activates and adjusts the squelch level when [SQL] is set between 12 o'clock and the fully clockwise position. • ATT: The Attenuator is enabled and adjusts the attenuator level when [SQL] is set between 12 o'clock and the fully clockwise position. Squelch Delay (Default: Short) Function > Squelch Delay Set the squelch delay to short or long to prevent repeated opening and closing of the squelch when receiving the same signal. • Short: Shortens the time until the squelch opens. • Long: Lengthens the time until the squelch opens. Fan Control (Default: Auto) Function > Fan Control Select the cooling fan control between Slow, Mid, Fast and Auto. • Slow: The fan rotates slow. • Mid: The fan rotates at mid speed. • Fast: The fan rotates fast. • Auto: The fan automatically turns ON during trans- mission or when the internal temperature of the transceiver exceeds the preset value. It remains ON until the temperature drops below the value. Dial Speed-UP (Default: ON) Function > Dial Speed-UP Turn the dial speed acceleration ON or OFF. The acceleration automatically speeds up the tuning dial speed when you rapidly rotate [DIAL]. • OFF: Turns OFF the function. • ON: Turns ON the function. Auto Repeater Function > Auto Repeater This item appears only in the Korean and U.S.A. ver- sion transceivers. The Auto repeater function automatically turns the du- plex operation and tone encoder* ON or OFF. The offset and repeater tone* are not changed by the auto repeat- er function. Reset these setting values, if necessary. For U.S.A. version • OFF: Turns OFF the function. • ON (DUP): Turns ON the duplex operation only. (Default) • ON (DUP, TONE): Turns ON the duplex operation and tone encoder*. For Korean version • OFF: T urns OFF the function. • ON: Turns ON the duplex operation and tone encod- er*. (Default) *The tone encoder will not be turned ON in the DV mode. Remote MIC Key Function > Remote MIC Key The function assignments for [F-1] and [F-2] keys on the optional HM-207 remote-control microphone can be changed. See pages 12-53, 12-54 for the assignable key functions. • During RX/Standby: T he assigned key function is en- abled while receiving or in standby. • During TX: The assigned key function is en- abled during transmission. Up/Down MIC Key Function > Remote MIC Key The function assignments for the [UP] and [DN] keys on the optional HM-154 hand microphone can be changed. See pages 12-53, 12-54 for the assignable key functions. • During RX/Standby: T he assigned key function is en- abled during receiving or standby. • During TX: The assigned key function is en- abled during transmission. 12-52
![](/manual_guide/products/icom-id5100a-instruction-manual-fa43d95/274.png)