Icom VE-PG4 Installation Guide ver.1.34 - Page 16
Controlling wireless LAN transceivers, Simplex and Full-Duplex communication, All Call and Group Call
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
1 Before using the VE-PG4 Feature description ■■Controlling wireless LAN transceivers You can communicate through IP networks using the VE-PG4 as a controller for up to 50 wireless LAN transceivers. LLA wireless access point is required. LLThe IP100H and IP100FS are usable, as of December, 2020. VE-PG4 [LAN] IP100FS (Remote communicator) Icom Access point (Example: AP-95M) IP100H (Wireless LAN transceiver) Simplex and Full-Duplex communication The VE-PG4 has two methods of communication, Simplex and Full-Duplex. Simplex is for communications where receive and transmit are done alternately one by one, and Full-Duplex is for simultaneous receive and transmit just like a telephone call. Set the Communication Method in "Transceiver Settings" for each IP communication terminal registered to the VE-PG4. LLYou have to connect an optional microphone to the IP100H to make Full-Duplex communications. You can communicate in the Simplex mode with no external microphone is connected. All Call and Group Call Simplex or Full-Duplex communication can be set for All Calls and Group Calls. Enter a group on the Destination Setting screen, and then set a Group ID to each Wireless LAN transceiver to join a Group. (Destination Settings > Destination Settings) Area Call To use Area Call, you must enable the [Area Call] for each IP100H on the Transceiver Settings screen, and then register the area's wireless access point (BSSID). (Transceiver Controller > Transceiver Settings > Transceiver Settings > Function Settings > Area Call) (Transceiver Controller > RoIP Server Settings > Area Call > Area Entry List) 1-10
![](/manual_guide/products/icom-vepg4-installation-guide-ver134-2d38ea1/16.png)