Icom VE-PG4 Installation Guide ver.1.34 - Page 34
Making a call, In Area
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
2 Setting up the transceivers Multicast mode operation ■■Making a call Set the same settings to all the client transceivers in the same area as the transceiver that is connected to the RoIP gateway (Example: IC-F5060). Icom transceiver (SU) Icom Transceiver IC-F5060 [EXT1] Area A VE-PG4 192.168.0.1 A1 IP Network Area B VE-PG4 Icom transceiver IC-F5060 [EXT1] Icom transceiver (SU) 192.168.0.2 B1 In Area A 1. While holding down [PTT], speak at your normal voice level. ••The transceiver A1 transmits to the transceiver in Area B. 2. Release [PTT] to receive. In Area B 3. While holding down [PTT], speak at your normal voice level. ••The transceiver B1 answers the call from Area A. 4. Release [PTT] to receive. 2-9
![](/manual_guide/products/icom-vepg4-installation-guide-ver134-2d38ea1/34.png)
2
SETTING UP THE TRANSCEIVERS
2-9
Multicast mode operation
■
Making a call
Set the same settings to all the client transceivers in the same area as the transceiver that is connected to the
RoIP gateway (Example: IC-F5060).
Icom
transceiver
(SU)
Icom
transceiver
(SU)
Icom Transceiver
IC-F5060
Icom transceiver
IC-F5060
[EXT1]
[EXT1]
VE-PG4
VE-PG4
IP
Network
Area A
Area B
192.168.0.2
192.168.0.1
A1
B1
In Area A
1.
While holding down [PTT], speak at your
normal voice level.
• The transceiver A1 transmits to the transceiver
in Area B.
2. Release [PTT] to receive.
In Area B
3.
While holding down [PTT], speak at your
normal voice level.
• The transceiver B1 answers the call from Area A.
4. Release [PTT] to receive.