Icom VE-PG4 Installation Guide ver.1.34 - Page 80

Assigning a static IP address to the KX-UT series phones, Setting up the KX series SIP phones

Get Icom VE-PG4 PDF manuals and user guides View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 80 highlights

4 Configuring the PBX system Setting up the KX series SIP phones ■■Assigning a static IP address to the KX-UT series phones Assign a static IP address, and do the Pre-provisioning procedure for the SIP phone. Refer to the manual provided with the SIP phone for details. 1 Without connecting to the DHCP server or to the currently working network, turn ON the SIP phone. 2 Enter the static IP address of the SIP phone. LLUse the software keys below the display and cursor to move in the menu, and push or to apply. 1 Turn ON the SIP phone, and then push or . 2 Open the static IP Address setting screen. ( > Network Settings > Network > Static) 3 Enter the IP Address of the SIP phone, and push . 4 Enter the Subnet Mask, and then push . 5 Push . 3 Turn ON the Embedded Web port. 1 Open the Embedded Web screen. ( > Network Settings > Embedded web) 2 Select "On," and then press . 3 Press . IP Address ▼ ▲ 192.168 .000.105 Back  Enter Embedded web On Off Back  Enter 4 Push . 5 Connect the SIP phone to the network. 6 Continue to do the Pre-provisioning described on page 4-15. 4-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
4
CONFIGURING THE PBX SYSTEM
4-11
Setting up the KX series SIP phones
■
Assigning a static IP address to the KX-UT series phones
Assign a static IP address, and do the Pre-provisioning procedure for the SIP phone.
Refer to the manual provided with the SIP phone for details.
1
Without connecting to the DHCP server or to the currently working network, turn ON the SIP phone.
2
Enter the static IP address of the SIP phone.
L
Use the software keys below the display and cursor to move in the menu, and
push <OK> or <Enter> to apply.
1
Turn ON the SIP phone, and then push <Setting> or <Setup>.
2
Open the static IP Address setting screen.
(<Setup> > Network Settings > Network > Static)
3
Enter the IP Address of the SIP phone, and push <Enter>.
4
Enter the Subnet Mask, and then push <Enter>.
5
Push <CANCEL>.
3
Turn ON the Embedded Web port.
1
Open the Embedded Web screen.
(<Setup> > Network Settings > Embedded web)
2
Select "On," and then press <Enter>.
3
Press <CANCEL>.
4
Push <CANCEL>.
5
Connect the SIP phone to the network.
6
Continue to do the Pre-provisioning described on page 4-15.
IP Address
▲
▼
192.168 .
00
0.105
Back
Enter
Embedded web
On
Off
Back
Enter