Icom VE-PG4 Installation Guide ver.1.34 - Page 84

Setting the Provisioning on the Embedded Web screen

Get Icom VE-PG4 PDF manuals and user guides View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

4 Configuring the PBX system Setting up the KX series SIP phones ■■Setting the Provisioning on the Embedded Web screen Enter the pre-provisioning (TFTP server) to the SIP phone, on its Embedded Web screen. The IP address of the SIP phone is required to access the Embedded Web screen. 1 Open the web browser of the PC that is connected to the same network as the SIP phone. 2 Enter the SIP phone's IP address, and then press the key. •• The login dialog is displayed. 3 Enter "admin" in the User name and "adminpass" in Password, and then click . •• The Embedded Web screen is displayed. 4 Click "Maintenance" in the upper right of the screen. 5 Click "Provisioning Maintenance" on the left side of the screen. 6 In "Standard File URL", enter "tftp://(your VE-PG4's IP address)/{MODEL}_{MAC}.cfg", and then click . (Example: when the IP address is 192.168.0.1) tftp://192.168.0.1/{MODEL}_{MAC}.cfg Your VE-PG4's IP address LLFor the KX-UT Series, restart the SIP phone to load the settings from the VE-PG4. Resetting a SIP phone to the factory default If you need to reset your SIP phone to the factory default for any troubleshooting, operate the SIP phone as follows: KX-UT Series 1. Push or . 2. Dial "#136". 3. Select "Factory Setting," and then push . 4. Select "Yes," and then push . 5. Select "Yes," and then push . ••The SIP phone loads the factory default and restarts. KX-HDV Series 1. Push . 2. Select "System Setting," and then push . 3. Dial "#136". 4. Select "Yes," and then push . ••The SIP phone loads the factory defaults and then restarts. 4-15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
4
CONFIGURING THE PBX SYSTEM
4-15
Setting up the KX series SIP phones
■
Setting the Provisioning on the Embedded Web screen
Enter the pre-provisioning (TFTP server) to the SIP phone, on its Embedded Web screen.
The IP address of the SIP phone is required to access the Embedded Web screen.
1
Open the web browser of the PC that is connected to the same network as the SIP phone.
2
Enter the SIP phone’s IP address, and then press the <Enter> key.
•
The login dialog is displayed.
3
Enter “admin” in the User name and “adminpass” in Password, and then click <OK>.
•
The Embedded Web screen is displayed.
4
Click “Maintenance” in the upper right of the screen.
5
Click “Provisioning Maintenance” on the left side of the screen.
6
In “Standard File URL”, enter “tftp://(your VE-PG4’s IP address)/{MODEL}_{MAC}.cfg”, and then click
<Save>.
(Example: when the IP address is 192.168.0.1)
Your VE-PG4’s IP address
L
For the KX-UT Series, restart the SIP phone to load the settings from the VE-PG4.
Resetting a SIP phone to the factory default
If you need to reset your SIP phone to the factory default for any troubleshooting, operate the SIP phone as
follows:
KX-UT Series
1.
Push <Setting> or <Setup>.
2. Dial “#136”.
3.
Select “Factory Setting,” and then push <ENTER>.
4.
Select “Yes,” and then push <ENTER>.
5.
Select “Yes,” and then push <ENTER>.
• The SIP phone loads the factory default and restarts.
KX-HDV Series
1. Push <MENU>.
2.
Select “System Setting,” and then push <ENTER>.
3. Dial “#136”.
4.
Select “Yes,” and then push <ENTER>.
• The SIP phone loads the factory defaults and then restarts.