Icom VE-PG4 Installation Guide ver.1.34 - Page 98
Online update, Information
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5 MAInTEnAnCE Updating the firmware Management > Firmware Update ■ Online update You can automatically check whether a new firmware version is available or not by pushing the button on the front panel of the RoIP Gateway. The [MSG] indicator on the front panel of the RoIP Gateway lights green if there is an Online update. Information • The DnS and the default gateway must be set to the RoIP Gateway in order to use the Online update through the Internet or a 4G/3G line. • When a SIM card is inserted, the Automatic Update Setting is not displayed. • Before the Online update, we recommend that you save your RoIP Gateway settings for a backup. 1 Open the Firmware Update screen. (Management > Firmware Update) 2 In [Online Update], click to check if there is an available firmware update. L If there is no update, "No Firmware update" is displayed or the [MSG] indicator does not light. q Click w Confirm 3 Click . • The RoIP Gateway starts accessing the Icom server to download the updates. L Depending on the firmware version, the RoIP Gateway may require that you initialize the settings. Before the Online update, we recommend that you save your RoIP Gateway settings for a backup. 4 After the update is complete, click [Back]. • Returns to the setting screen. If the setting screen is not displayed, the update may not be completed. Wait for a few minutes, and then click [Back] again. Click 5-8