Icom VE-PG4 Installation Guide ver.1.34 - Page 5
Confirming the MAC address, Network and system default settings
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
INTRODUCTION Network and system default settings Menu Item Screen Network Settings IP Address Router Settings Connection Port Settings DHCP Server WAN EXT I/O (EXT) Management Administrator Setting Item IP Address DHCP Server Connection Type EXT I/O Port Mode Option IP Address Subnet Mask DHCP Server Connection Type Connected Unit EXT I/O Transceiver Model Administrator Password EXT I/O Port Transceiver Model Username Current Password: LLSee the Operating guide for more details on above settings. LLThe Administrator's Username (admin) cannot be changed. To prevent unauthorized access ••You must choose a strong password and change it occasionally. ••Choose one that is not easy to guess. ••Use numbers, characters and letters (both lower and upper case). Value 192.168.0.1 255.255.255.0 Disable LAN Port Transceiver (EXT 1/2) EXT I/O Unit (EXT 3/4) EXT I/O 1 (EXT 1) IC-F5060/F6060 admin (fixed) admin (lower case) Confirming the MAC address The MAC address of the built-in WAN or LAN module of the VE-PG4 is shown on the Serial label at the bottom of the product. LLYou can also check the MAC address on the setting screen. See the Operating guide for details. VE-PG4 (Bottom) Serial label 0090C7 0090C7 The contents of the serial label may vary, depending on the version. MAC address for WAN MAC address for LAN iv
![](/manual_guide/products/icom-vepg4-installation-guide-ver134-2d38ea1/5.png)