Icom VE-PG4 Installation Guide ver.1.34 - Page 25
Changing the IP address on the setting screen, IP Address assigning
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1 Before using the VE-PG4 The setting screen ■■Changing the IP address on the setting screen Network Settings > IP Address > IP Address LLMake sure the VE-PG4's IP address does not conflict other network devices. 1 Click "Network Settings", and then click "IP Address". 2 In the "IP Address" screen, enter the new IP Address and then click . q Enter •• The changes are saved. 3 Click to return to the previous page. •• The login menu is displayed. 4 Confirm the new IP address is displayed, and then login the VE-PG4 again. w Click IP Address assigning An IP Address consists of two parts, the "Network" and "Host." For example, in the VE-PG4's IP address "192.168.0.1" (Class C), the digits "192.168.0" are the network digits and the "1" at the end is the host digit. Network devices with the same network numbers are recognized as belonging to the same network. Furthermore, the network devices in the network are identified by the host part. Assign the IP Address considering the following points. ••Set the identical network digits for all the devices that you want to add into the network. ••Do not set the same host digit to network devices in the same network. ••Do not set the network address whose the first digit of the host part is "0." ••Do not set the broadcast address whose the last digit of the host part is "255." 1-19
![](/manual_guide/products/icom-vepg4-installation-guide-ver134-2d38ea1/25.png)