Icom VE-PG4 Installation Guide ver.1.34 - Page 39
Connecting to a digital radio through the network, NXDN Conventional mode operation
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2 Setting up the transceivers NXDN Conventional mode operation Connection Port Settings > Digital Transceiver (D-TRX) ■■Connecting to a digital radio through the network Connect a digital radio to the VE-PG4 through the network, and set in [Digital Transceiver Connection]. VE-PG4 (192.168.0.1) A Icom trasnsceiver IC-F5060 [EXT1] [LAN] SWITCH [D-TRX1] [D-TRX2] Repeater BB IC-FR5000 (192.168.0.3) P0 P1 P2 P3 P4 CH5 P0 P1 P2 P3 P4 IP Network Repeater CC IC-FR5000 (192.168.0.4) CH25 1 Open the Digital Transceiver (D-TRX) screen. (Connection Port Settings > Digital Transceiver (D-TRX)) 2 In [Digital Transceiver], select a port (example: D-TRX1), in [Digital Transceiver System], select a system (example: NXDN Conventional), and then click . q Select w Select e Click 3 Enter the settings for the Repeater B (example: IC-FR5000), such as the IP address, Port Number, and Connection Key Code. Enter 4 Click . 5 In Digital Transceiver Connection, click to connect to the Repeater B. •• "Connecting" is displayed when the RoIP Gateway is successfully connected. 6 Set up the Repeater C as the same way. 2-14