Icom VE-PG4 Installation Guide ver.1.34 - Page 83
Using an external DHCP server (KX-HDV series
![]() |
View all Icom VE-PG4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4 Configuring the PBX system Setting up the KX series SIP phones ■■Using an external DHCP server (KX-HDV series) When using a DHCP server other than the VE-PG4's built-in DHCP server, do the Pre-provisioning procedure to the SIP phone. Refer to the manual provided with the SIP phone for details. 1 Connect to the DHCP server, and then turn ON the SIP phone. •• The network settings will be automatically set. 2 Confirm the assigned IP address of the SIP phone. LLUse the software keys below the display and cursor to move in the menu, and push or to apply. 1 Push or . 2 Open the IP Address status screen. ( > System Settings > Status > IPv4 Settings > IP Address) 3 Check the IP address, and then press . 4 Press . 3 Turn ON the Embedded Web port. 1 Open the Embedded Web screen. ( > Basic Settings > Other Option > Embedded Web) 2 Select "On," and then press . 3 Press . 4 Continue to do the Pre-provisioning described on page 4-15. IP Address 192.168 .000.105 Back OK Next Embedded Web On Off Back OK 4-14
![](/manual_guide/products/icom-vepg4-installation-guide-ver134-2d38ea1/83.png)