Intel SR2600UR Service Guide - Page 117
Removing the I/O Expansion Module
![]() |
UPC - 735858206778
View all Intel SR2600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
6. First fit the front of the module into the back panel slot(s), and then attach the module to the server board connector and engage the standoffs (see letter "C" in Figure 88). I/2O-SEoxcpk.eMt odulIe/1O-SEoxcpk.eMt odule Snap Standoff C A B Standoff Hole Server Board I/O Connector 1 Filler Panels AF003006 Figure 88. Installing the I/O Expansion Module to the Server System 7. Install the processor air duct. For instructions, see "Installing the Processor Air Duct" on page 57. 8. Install the PCI riser assembly into the server system. For instructions, see "Installing the PCI Riser Assembly" on page 51. Removing the I/O Expansion Module To remove the I/O expansion module, follow these steps: 1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 50. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 56. 3. Disconnect the I/O expansion module from the server board connector and the standoffs and remove the module out of the server system (see letter "A" in Figure 89. 4. Remove the standoffs from the server board (see letter "B" in Figure 89). Intel® Server System SR2600UR/SR2625UR Service Guide 97
![](/manual_guide/products/intel-sr2600ur-service-guide-1ac9b07/117.png)