Intel SR2600UR Service Guide - Page 99
Securing the Interposer Board to the Device Tray
UPC - 735858206778
View all Intel SR2600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
5. Make sure the interposer board fits onto alignment pin on device tray (see letter "A" in Figure 65) and attach to the tray with screw (see letter "B" in Figure 65). B A Tray alignment pin fits into this hole. AF002964 Figure 65. Securing the Interposer Board to the Device Tray 6. Insert the optical device tray assembly into the server system (see letter "A" in Figure 66). 7. Make sure that the back end of the interposer board plugs into the matching socket on the backplane (see letter "B" in Figure 66). 8. Verify that the blue release lever on the tray locks into place. 9. (Optional) For installing the optional USB floppy drive, note the location of the backplane USB connector (see letter "C" in Figure 66) and refer to the documentation that came with the device. USB Connector A Interposer Board AssemOTbprlaytiycal Drive B Release Lever Backplane AF002965 Figure 66. Installing an Optical Drive Assembly into the Server System Intel® Server System SR2600UR/SR2625UR Service Guide 79