Intel SR2600UR Service Guide - Page 142
Replacing the Power Distribution Module
UPC - 735858206778
View all Intel SR2600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
- If no power supply is to be installed, insert a power supply filler panel as shown in Figure 115. AF000023 Figure 115. Installing Power Supply Filler Panel into the Server System Replacing the Power Distribution Module To replace the power distribution module, follow these steps: 1. If installed, remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 50. 2. If installed, remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 56. 3. Remove the large air baffle. For instructions, see "Removing the Large Air Baffle" on page 70. 4. Remove the fan module assembly. For instructions, see "Replacing a Fan Module" on page 127. 5. Disconnect all power cables from the server board, backplane, and midplane. 6. Remove the hot-swap power supply/supplies. For instructions, see step 1 in "Replacing the Power Supply" on page 120. 7. Remove the two screws to release the module (see letter "A" in Figure 116). 122 Intel® Server System SR2600UR/SR2625UR Service Guide