Intel SR2600UR Service Guide - Page 164
Restoring the BIOS Defaults
![]() |
UPC - 735858206778
View all Intel SR2600UR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Restoring the BIOS Defaults If you need to restore the BIOS default settings, the BIOS Default jumper will need to be used. 1. Power down the system; do not disconnect the AC power. 2. Open the server system. For instructions on removing the system cover, see "Removing the System Cover" on page 48. 3. Locate the BIOS Default jumper block at board position J1E7. 4. Move the jumper from the normal operation position (covering pins 1 and 2) to the Set Default position (covering pins 2 and 3). BIOS Default J1E7 Normal 2 Set 3 Default AF003113 Figure 133. BIOS Default Jumper 5. Wait five seconds. 6. Return the BIOS Default jumper to the normal position (covering pins 1 and 2). 7. Close the server system. 8. Power up the system. 144 Intel® Server System SR2600UR/SR2625UR Service Guide
![](/manual_guide/products/intel-sr2600ur-service-guide-1ac9b07/164.png)