Intel SR2600UR Service Guide - Page 145

Locking Lever B BBoaacrkdplane Backplane Connector ControlLPoacnaell A AF002984 Figure 118. Installing Control Panel Module into the Server System Replacing the Control Panel (Intel® Server System SR2625UR only) The steps for replacing the standard control panel and the Intel® Local Control Panel in Intel® Server System SR2625UR are nearly identical. Use the following steps for both varieties of the control panel. Where necessary, differences between the two control panels are noted. Your server must be operated with a control panel installed. Caution: The control panel is NOT hot-swappable. Before removing or replacing the control panel, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. To replace the control panel, follow these steps: 1. Disconnect the two cables from the back side of the backplane. 2. Press the latch at the back of the control panel and push it forward to release it from the system (see letter "A" in Figure 119). Intel® Server System SR2600UR/SR2625UR Service Guide 125