Intel SR2600UR Service Guide - Page 80

1. Remove the PCI riser assembly. For instructions, see "Removing the PCI Riser Assembly" on page 50. 2. Remove the processor air duct. For instructions, see "Removing the Processor Air Duct" on page 56 3. Remove the heatsink, if installed. For instructions, see "Removing the Heatsink" on page 64. 4. Locate the processor socket. 5. Push the lever handle down and away from the socket to release it (see letter "A" in Figure 41). 6. Rotate the lever open all the way (see letter "B" in Figure 41). A B AF002835 Figure 41. Lifting the Processor Socket Handle 7. Push the rear tab with your finger tip to bring the front end of the load plate open slightly (see letter "A" in Figure 42). 8. Open the load plate (see letter "B" in Figure 42). A B Figure 42. Opening the Load Plate 9. Remove the protective socket cover (see Figure 43). AF002836 Note: Do not touch the orientation posts on the socket; they are very sensitive and easily damaged. Note: Retain the protective socket cover for use when removing a processor that will not be replaced. 60 Intel® Server System SR2600UR/SR2625UR Service Guide