Konica Minolta AccurioPrint 2100 GBC Binder G1 User Manual - Page 18
Supply Information
View all Konica Minolta AccurioPrint 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
F. Element Closing: A properly closed element is circular. It allows the pages to turn without restricting the paper, while not allowing sheets to fall out of the binding. Above is a diagram of a correctly closed element. The element is considered under-closed if it is possible to pull a sheet out of the twin loop binding by pulling on the end of the sheet. The element is considered over-closed if the element is oval shaped. If the element is under-closed increase the closer value in the LCD tree, decrease this value instead if the element is over-closed. After changing the setting run a new book and inspect its element. WIRE BINDER G1 GB 10. SUPPLY INFORMATION A. Supply Order Information Twin loop wire supply for the BINDER G1 machine comes in 5 different sizes and 3 different colors. In order to switch between size and colors of twin loop wire, follow the instructions in Section 4. To re-order or order new wire supply, refer to the table below. Description eWire Spool, Element Size 'A', Black eWire Spool, Element Size 'B', Black eWire Spool, Element Size 'C', Black eWire Spool, Element Size 'D', Black eWire Spool, Element Size 'E', Black eWire Spool, Element Size 'A', White eWire Spool, Element Size 'B', White eWire Spool, Element Size 'C', White eWire Spool, Element Size 'D', White eWire Spool, Element Size 'E', White eWire Spool, Element Size 'A', Silver eWire Spool, Element Size 'B', Silver eWire Spool, Element Size 'C', Silver eWire Spool, Element Size 'D', Silver eWire Spool, Element Size 'E', Silver Reorder Number 7717962 7717963 7717964 7717965 7717966 7717968 7717969 7717970 7717971 7717972 7717974 7717975 7717976 7717977 7717978 Die Set Part Numbers: Die, eWire, 3:1, Round Die, eWire, 3:1, Square 7714915 7714916 Die Set Description: Square Hole Die: 1 32-LTR 34-A4 eWire; Square; 3 Holes per inch; Hole Size: 5mm x 5mm (0.197" x 0.197") (L x W); Center-to-Center Hole Spacing: 8.5mm (0.333") Round Hole Die: 1 32-LTR 34-A4 eWire; Round; 3 Holes per inch; Hole Size: 5.5mm (0.217") Diameter; Center-to-Center Hole Spacing: 8.5mm (0.335") B. Book Capacity Information Element Size A B C D E Sheet Capacity* (75 gsm) 15-30 31-50 51-60 61-70 71-80 Max. Document Thickness (mm) 3 5 6 7 8 Max Books Per Spool† Letter A4 515 485 320 300 250 235 180 170 130 120 *Sheet capacity based on 20lb (75 gsm) paper. Subtract 10 sheets (1mm) to accommodate covers. †Max books per spool is the greatest number of books a spool can produce if none is wasted during operation or set up. 18