Konica Minolta AccurioPrint 2100 GBC Binder G1 User Manual - Page 3
Table Of Contents, Safety Instructions
View all Konica Minolta AccurioPrint 2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
TABLE OF CONTENTS 1. SAFETY INSTRUCTIONS 2. INTRODUCTION 3. BINDER G1 SPECIFICATIONS 4. BINDER G1 OVERVIEW 5. BINDER G1 DIES FOR PUNCH G2 6. QUICK START GUIDE 7. USER OPERATIONS 8. USER DISPLAY 9. PROBLEM SOLVING 10. SUPPLY INFORMATION 11. LCD JAM CODES 1. SAFETY INSTRUCTIONS WIRE BINDER G1 GB CAUTION: THE BINDER G1 ON/OFF SWITCH DOES NOT CUT OFF POWER FROM THE PRINTER. 3 The BINDER G1 must be connected to a supply voltage 4 corresponding to the electrical rating of the machine operation 4 instructions (also listed on the serial number label). 5 The grounding plug is a safety feature and will only fit into the proper grounding-type power outlet. If you are unable to insert the 6 plug into an outlet, contact a qualified electrician to have a suitable outlet installed. 6 Do not alter the plug on the end of the cordset (if provided) of the 6 BINDER G1. It is provided for your safety. 13 Unplug the BINDER G1 before moving the machine machine or 14 whenever the machine is not in use for an extended period of time. 18 Do not operate the BINDER G1 if the machine has a damaged power supply cord or plug. Do not operate the machine after any 19 malfunction. Do not operate the machine in case of liquid spills, or if the machine has been damaged in any other way. Do not overload electrical outlets beyond their capacity. To do so may result in fire or electrical shock. THE SAFETY OF YOU AND OTHERS IS VERY IMPORTANT TO GBC. IMPORTANT SAFETY MESSAGES AND INFORMATION ARE CONTAINED IN THIS MANUAL AS WELL AS ON THE MACHINE ITSELF. PLEASE MAKE SURE YOU CAREFULLY READ AND UNDERSTAND ALL OF THESE BEFORE OPERATING THE MACHINE. THE SAFETY ALERT SYMBOL PRECEDES EACH SAFETY MESSAGE IN THIS OPERATION INSTRUCTIONS MANUAL. THIS SYMBOL INDICATES A POTENTIAL PERSONAL SAFETY HAZARD THAT COULD HURT YOU OR OTHERS. Cleaning You may clean the exterior of the BINDER G1 using a soft, damp cloth. Do not use detergents or solvents as damage to the machine may occur. Safety messages Do not attempt to service your BINDER G1 yourself. Contact an authorized service representative for any required repairs or major maintenance for your BINDER G1. THE FOLLOWING PICTORIALS ARE FOUND ON THE BINDER G1: This safety symbol means that you might get seriously hurt or killed if you open the product and expose yourself to hazardous voltage. NEVER remove the screwed on covers. ALWAYS refer service requirements to qualified service personnel. This safety symbol means that you may get cut if you touch the knife positioned behind the cover it is affixed to. Do not remove this cover or place fingers behind it. Important safeguards Use the BINDER G1 only for its intended purpose of creating bound books according to the indicated specifications. Retain this Operation Instructions manual for future use. CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT CUT OFF POWER FROM THE BINDER G1. DO NOT REMOVE THE MACHINE'S COVER. There are NO user-serviceable parts inside the machine. In order to avoid potential personal injury and/or damage to property or the machine itself, do not remove the machine's cover. FCC NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Operation Manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. CAN ICES-3 (A)/NMB-3(A) CAUTION: ANY MODIFICATIONS MADE TO THIS DEVICE THAT ARE NOT APPROVED BY GBC MAY VOID THE AUTHOIRITY GRANTED TO THE USER BY THE FCC AND/OR INDUSTRY CANADA TO OPERATE THIS EQUIPMENT. 3