Home » Konica Minolta Manuals » Printers » Konica Minolta bizhub 950i » Manual Viewer

Konica Minolta bizhub 950i bizhub 950i/850i Security Operations User Guide - Page 50

System auto reset function

View all Konica Minolta bizhub 950i manuals

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

2.10 System auto reset function 2 2.10 System auto reset function When a log-on to the administrator mode becomes successful, the machine enables setting of the operation of the System Auto Reset function. If no operations are performed for a predetermined period of time during access to the administrator mode or user mode (during setting of user authentication) from the control panel, the System Auto Reset function automatically causes the user to log off from the mode. If you set the time to activate the System Auto Reset function too long, there is a risk that an unauthorized access may occur during your absence. Set the minimum period of time within five minutes. If the time longer than 5 minutes has been set, please redo this setting. The predetermined period of time, after which the System Auto Reset function is activated, can be selected from among nine values between 1 min. and 9 min. System Auto Reset can also be set to [OFF]. If no operations are performed for 1 min. even with System Auto Reset set to [OFF], the function causes the user to log off from the mode automatically. Tips Processing of a specific job, however, takes precedence over the System Auto Reset function. That is, even if a predetermined period of time elapses during which no operations are performed, once the processing of the specific job has been started, the System Auto Reset function does not cause the user to log off from the mode. The user logs off from the mode after the lapse of a predetermined period of time after the processing of the specific job is completed. 2.10.1 Setting the system auto reset function 0 The control panel and the Web Connection can be used for this setting. 0 For the procedure to access the administrator mode, see page 2-2. 0 Do not leave the machine with the setting screen of administrator mode left shown on the display. If it is absolutely necessary to leave the machine, be sure first to log off from the administrator mode. 1 Call the administrator mode. 2 Tap [System Settings] - [Reset Settings] - [System Auto Reset]. 3 Enter the period of time (1 min. to 9 min.) after which system auto reset is activated. % The time for System Auto Reset can be set to a value between 1 min. and 9 min., variable in 1-min. increments. An input data error message appears when any value falling outside the range of 1 to 9 min. is set. Enter the correct System Auto Reset Time. % If no operations are performed for 1 min. even with System Auto Reset set to [OFF], the function is activated to cause the user to log off from the mode automatically. 4 Tap [OK]. bizhub 950i/850i/AccurioPrint 950i/850i 2-27

Section	Page
Contents	2
1 Security	6
1.1 Introduction	6
1.1.1 Persons using the machine	6
1.1.2 Relation between user and job deletion	7
1.2 Compliance with the ISO15408 Standard	8
1.2.1 Hardware and software	8
1.2.2 Operating precautions	8
1.3 Installation procedure	10
1.3.1 Setting of password rules	11
1.3.2 Setting of IP address and DNS host	11
1.3.3 Setting of administrator password	11
1.3.4 Setting of user authentication	12
1.3.5 Setting of accurate date and time	12
1.3.6 Setting of job log obtaining method	12
1.3.7 Setting of operation of ID & Print function	12
1.3.8 Setting of Memory RX	12
1.3.9 Setting of FW Update (USB) Password	13
1.3.10 Setting of FIPS mode	13
1.3.11 Setting of function pattern customization	13
1.3.12 Setting of Enhanced Security Mode	13
1.3.13 Setting of IPsec communication certificate	14
1.3.14 Setting of network	14
1.3.15 Check of IPsec setting for communication with each server	14
1.3.16 Check of settings banned for operation	14
1.3.17 Check of device information	14
1.4 Enhanced security mode	15
1.4.1 Major security functions in operation under ISO15408 certification	15
1.5 Precautions for operation control	16
1.5.1 Roles of the owner of the machine	16
1.5.2 Maintenance of the security environment	16
1.5.3 Roles of the administrator	17
1.5.4 Password usage requirements	17
1.5.5 External authentication server control requirements	17
1.5.6 Security function operation setting operating requirements	18
1.5.7 Operation and control of the machine	18
1.5.8 Machine maintenance control	20
1.5.9 Precautions for using the printer driver	20
1.6 Miscellaneous	21
1.6.1 Password rules	21
1.6.2 Precautions for use of various types of applications	21
1.6.3 Encrypting communications	22
1.6.4 Print functions	22
IPP printing	22
1.6.5 FAX functions	22
1.6.6 USB keyboard	22
1.6.7 Different types of boxes	22
1.6.8 Terminating a session and logging out	23
1.6.9 Occurrence of authentication error during external server authentication	23
1.6.10 Finding the version information	23
2 Administrator Operations	25
2.1 Accessing the administrator mode	25
2.1.1 Accessing the administrator mode	25
2.1.2 Accessing the user mode	30
2.1.3 Checking the number of wrong entries in authentication	32
Conditions to clear the number of times of check	32
2.2 Enhancing the security function	33
2.2.1 Items cleared by format	36
2.2.2 Setting the Enhanced Security Mode	37
2.3 Setting the password rules	38
2.3.1 Setting the password rules	38
2.4 Setting IPsec	39
2.4.1 IPsec setting	39
2.4.2 Introducing the device certificate for IPsec communication	41
2.4.3 Deleting the IPsec communication device certificate	42
2.4.4 Introducing the CA (certification authority) certificate for IPsec communication	42
2.5 Firmware verification function at the time of starting the machine	43
2.5.1 Setting the firmware verification function	43
2.5.2 Self-test function	43
2.6 Preventing unauthorized access	44
2.6.1 Setting Prohibited Functions	44
2.7 Canceling the operation prohibited state	46
2.7.1 Performing release setting	46
2.8 Setting the authentication method	47
2.8.1 Setting the authentication method	47
2.8.2 Setting the external server	48
2.9 ID & Print setting function	49
2.9.1 Setting ID & Print	49
2.10 System auto reset function	50
2.10.1 Setting the system auto reset function	50
2.11 User setting function	51
2.11.1 Making user setting	51
2.12 User box function	53
2.12.1 Setting user box usage restriction	53
2.12.2 Setting the user box	54
2.12.3 Changing the user attributes and box password	55
2.12.4 Setting Memory RX	56
2.12.5 Batch deleting the documents in the Memory RX User Box	56
2.13 Changing the administrator password	57
2.13.1 Changing the administrator password	57
2.14 Obtaining job log	58
2.14.1 Obtaining and deleting a job log	58
2.14.2 Job log data	60
2.15 Setting time/date in machine	89
2.15.1 Setting time/date	89
2.15.2 Setting daylight saving time	89
2.16 TCP/IP setting function	90
2.16.1 Setting the IP Address	90
2.16.2 Registering the DNS server	90
2.17 E-mail setting function	91
2.17.1 Setting the SMTP server (E-mail server)	91
2.18 SMB setting function	92
2.18.1 Setting a client	92
2.19 WebDAV setting function	93
2.19.1 Setting a client	93
2.20 Automatic logoff setting function	94
2.20.1 Setting automatic logoff	94
2.21 FIPS mode setting function	95
2.21.1 Setting the FIPS mode	95
2.22 Firmware update function	96
2.22.1 Updating the firmware	96
2.23 Job deletion setting function	97
2.23.1 Setting the job deletion	97
3 User Operations	99
3.1 User authentication function	99
3.1.1 Performing user authentication	99
3.1.2 Accessing the ID & Print document	102
3.1.3 Number of wrong entries in authentication	102
Conditions to clear the number of times of check	102
3.2 Change password function	103
3.2.1 Performing change password	103
3.3 User box function	104
3.3.1 Setting the user box	104
3.3.2 Changing the user attributes and box password	105
3.3.3 Accessing the user box and user box file	106
3.3.4 Number of wrong entries in entering the box password	107

Match case Limit results 1 per page

bizhub 950i/850i/AccurioPrint 950i/850i

2-27

2.10

System auto reset function

2.10

System auto reset function

When a log-on to the administrator mode becomes successful, the machine enables setting of the operation

of the System Auto Reset function.

If no operations are performed for a predetermined period of time during access to the administrator mode

or user mode (during setting of user authentication) from the control panel, the System Auto Reset function

automatically causes the user to log off from the mode.

If you set the time to activate the System Auto Reset function too long, there is a risk that an unauthorized

access may occur during your absence. Set the minimum period of time within five minutes. If the time longer

than 5 minutes has been set, please redo this setting.

The predetermined period of time, after which the System Auto Reset function is activated, can be selected

from among nine values between 1 min. and 9 min. System Auto Reset can also be set to [OFF]. If no oper-

ations are performed for 1 min. even with System Auto Reset set to [OFF], the function causes the user to log

off from the mode automatically.

Tips

Processing of a specific job, however, takes precedence over the System Auto Reset function. That is, even

if a predetermined period of time elapses during which no operations are performed, once the processing of

the specific job has been started, the System Auto Reset function does not cause the user to log off from the

mode. The user logs off from the mode after the lapse of a predetermined period of time after the processing

of the specific job is completed.

2.10.1

Setting the system auto reset function

The control panel and the

Web Connection

can be used for this setting.

For the procedure to access the administrator mode, see page 2-2.

Do not leave the machine with the setting screen of administrator mode left shown on the display. If it

is absolutely necessary to leave the machine, be sure first to log off from the administrator mode.

Call the administrator mode.

Tap [System Settings] - [Reset Settings] - [System Auto Reset].

Enter the period of time (1 min. to 9 min.) after which system auto reset is activated.

The time for System Auto Reset can be set to a value between 1 min. and 9 min., variable in 1-min.

increments. An input data error message appears when any value falling outside the range of 1 to 9

min. is set. Enter the correct System Auto Reset Time.

If no operations are performed for 1 min. even with System Auto Reset set to [OFF], the function is

activated to cause the user to log off from the mode automatically.

Tap [OK].